Agglomerates are particle clusters that indicate specific activities or conditions. Agglomerates are very fragile and can only be recognized in tapelifts where the spatial distribution of the particles is retained during the sampling process.

Cleaning agglomerates are particle clusters that indicate specific cleaning activities. These include dusting, damp wiping, carpet cleaning, floor striping, floor scrubbing, spray cleaners, etc. Each process is accompanied by its own characteristic agglomerate. Damp wiping results in a cluster of particles often associated with fibers from the wiping cloth. Sponge wiping results in circular collections of particles formed by the surface tension of residual droplets of water left behind. Dry wiping leaves particles aligned in the direction of the wipe with all larger particles being absent. Carpet cleaning creates a liquid aerosol of cleaning solution and particles. The liquid evaporates, which leaves little spheres of fine particles bound with the residual cleaning agent. These spheres include mixtures of fine natural minerals, shoe wear, carpet wear, humus, pollen, spores, insect parts, starch, and other common household, office, or classroom debris. Similar spheres are created by floor stripping and floor scrubbing but the agglomerate contains more isotropic material from the floor coating. The aerosol agglomerates are typically less than 50 micrometers in diameter. Spray cleaners are products that are sprayed onto surfaces and the surface is wiped. The spray creates small liquid droplets that may float to adjacent surfaces that are not being cleaned. These droplets leave small circular deposits of the cleaning agent.

HVAC agglomerates are particle clusters that are formed in the HVAC sytem. There are two basic sources for these particles. One is the filter medium where the particles are agglomerated on the surface of the filter. These particles are knocked loose during filter change-out or if a hole is created in the filter. The other source is the slow accumulation of particles on the wall of the HVAC duct. These particles start typically as diffusional deposits. As they first accumulate on the wall they create an isolated stactic charge. This attracts more particles and the agglomerate begins to grow. It continues to grow until its mass is sufficient that vibration in the duct jars the agglomerate free and it becomes part of the air stream. These agglomerates are generally dominated by soot particles and are quite dark in appearance. At times they may be dominated by a local activity, such as remodeling, and take on a different appearance. Agglomerates That form in the recycle loop of the HVAC system will include skin flakes and typical indoor particles rather than the pollens, fine minerals, insect parts, tire wear, etc. associated with the fresh air supply duct.

Remodeling agglomerates are particle clusters that indicate remodeling activities. These particles may agglomerate during a cleaning activity or they may agglomerate in the HVAC system. Their characteristic property is that they consist of particles like plaster, paint spheres, glass fiber, sawdust, and other particles associated with the remodeling activity. These particles may be associated with health complaints.

Wet road agglomerates are particle clusters that include tire wear, road debris, pollens, and other particles commonly found on the surface of roads. The road debris may be from asphalt or cement roads. These particles are the road spray residues formed when the road is wet and the normal road debris is agglomerated rather than free floating.